HDMI splitter เข้า1 ออก 4 4kx2k FULL HD 3D 2160P
FEATURESL One HDMI input signal split to four HDMI sink devicesL HDCP 1.3 protocol compliantL Support 3D /4K*2KL Support CECL Support deep color 30bit 36bit 48bitL Support Blue-Ray 24/50/60fs/HD-DVD/xvYCCL Digital audio format as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSDL Support signal RetimingL Support input up to 15metres AWG26 HDMI standard cable lengthOutput up to 25metres AWG26 cable lengthL No loss of qualityL Installs in minutesL Need DC5V/1A power supplyCONNECTING AND OPERATING:1 Connect one cable from HDMI source devices into HDMI Splitter input.2 Connect one cable from each display (monitor or projector) into the HDMI Splitter outputs.3 Connect 5V power supply to the HDMI 1x4 Splitter.SPECIFICATIONS: HDSP0104HDMI version... HDMI 1.4VHDCP version...... HDCP1.3HDMI resolution... 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport video color format... 24bit/deep color 30bit 36bitSupport audio format... DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSDMax bandwidth... 340MHzMax baud rate...... 6.75GbpsInput/Output TMDS signal... 0.5~1.5Volts P-P (TTL)Input/Output DDC signal...... 5Volts P-P (TTL)Input cable distance.... AWG26 HDMI standard cable ≤ 8MOutput cable distance... 10m HDMI standard cable ≤ AWG26.Max working current...... 600mAPower adapter format..Input... ..AC (50HZ 60HZ) 100V-240V; Output: DC5V/1AOperating Temperature range...... (-15 to +55 ℃).Operating Humidity range...... .5 to 90%RH (No Condensation)Dimension (L x W x H)...... 115x61x25 (mm)Weight... 190g..Notes:Pls use the machine as the instruction listed to keep the long use lifetime of the machine.1 The machine should be placed at the spot far from the Damp High-Temperature Dusty Erosive and oxidative environment.2 All parts will be free from the strong shake hit fall.3 Touching the power adaptor with the wet hands is prohibited.4 Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.5 Pls turn the power off when the machine is not used for long time.6 Pls do not open the cover and do not touch the inside parts.7 Pls use the original factory power adaptor.Before power on pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:Serial NOTrouble DescriptionCause and Ways to deal with1Non-Power-Connected1 Check if the power adaptor head is truly and correctly inserted the power socket.2 Check the power switch if it is in on status.2No Picture1 Pls to make sure that the TV is on and has been connected with the machine.2 To check if the signal source is on and well connected.3 Check the system connection quality.4 Check if the line is all good quality.5 the Check the cable quality3Obscure Picture1 To try again to connect the cable to be free from the unsuccessful connection.2 HDMI Cable Quality; s:8: p_cndesc ; s:42672